=====================================
                   Adaptec EZ-SCSI 4.00c Upgrade Program
                   =====================================

    Welcome to the Adaptec EZ-SCSI Upgrade program. This utility will upgrade
your Adaptec EZ-SCSI 4.0 installation to Adaptec EZ-SCSI 4.00c. In addition, 
v1.00.22 of Adaptec CD Writer will be included as well as v1.01 of Adaptec 
Backup. You will need to install the retail version of Adaptec EZ-SCSI 4.0 
before running this utility. This program is designed to run on Windows 95 
and NT operating systems. 


NOTE:  Users of Adaptec EZ-SCSI 3.x, and earlier, can upgrade to Adaptec
       EZ-SCSI 4.0 by calling one of the following numbers:

       
       Software Ordering (U.S.A. and Cananda)		(800) 442-7274
       M-F: 6:00am to 5:00pm Pacific Standard Time

       International Software Ordering			(408) 957-7274
       M-F: 6:00am to 5:00pm Pacific Standard Time

       Software Ordering (Germany)			0130 828022
       M-F: 9:00 to 18:00

       Software Ordering (France)			05 90 77 04
       M-F: 9:00 to 18:00

       Software Ordering (United Kingdom)		0800 966526
       M-F: 9:00 to 18:00

       Software Ordering (Europe, other)		+32 11 300 379
       M-F: 9:00 to 18:00


=================================
1. How to run the Upgrade Program
=================================

    After decompressing the files onto your hard drive, you can start the 
upgrade program by running EZ40.EXE.


===================
2. Troubleshooting
===================

If the upgrade is not successful, please check the following:

1.)  Make sure there are no other SCSI applications resident.  If there are,
     please exit all running applications and try the upgrade again.

2.)  If the upgrade indicates that you do not have EZ-SCSI 4.0 installed,
     make sure you have the full version of Adaptec EZ-SCSI.  This upgrade
     program is not intended for Adaptec EZ-SCSI Lite 4.0.

3.)  If the upgrade indicates that you do not have EZ-SCSI 4.0 installed,
     but you know it's installed, this may be caused by your having moved
     the EZ-SCSI installation.  If you experience this, re-install Adaptec
     EZ-SCSI with the new directory name.  Then run the EZ-SCSI 4.0 upgrade
     program again.

4.)  Make sure you have at least 2 MBytes of free space on your hard drive.